Valve V1 is designed for pneumatic drill and mounting on the distributor with inner diameter of hose pipe 32mm. Connection is done by three-wire cable with a standard lengths 2m. This type of tramline valve returns seed freely into the space under the distributor.
| Valve designation | V1 |
| The control mechanism | Micro gear motor |
| Power voltage | Un=12Vss +/- 20% |
| Rated current | In= 20mA |
| Short circuit current | Ik= 2A |
| Overload protection | Overload resettable fuse |
| Time of moving sliding element | 1 second |
| Signal open / shut off | Red/Green LED diode on the valve body |
| supply cable | H03VV-F 3x0.5mm, flexible length, 2m standard |
| End of the cable | sleeve connector AMP 3pin can be optionally fitted |
| protection level IP | IP 64 |
| Material | UV stable hardened ABS |
| Product life | >100.000 cycles |
| function | wire colour | valve open | interposition | shut off |
|---|---|---|---|---|
| IN1 | brown | 0V | - | +12V |
| IN2 | blue | +12V | - | 0V |
| OUT1 | yellow/green | Signal +12V | 0V | Signal +12V |
valve open
valve close
IČ 29296145, DIČ CZ29296145
tvorba www, firemní a svatební videa
SKILL production
Jsou tyto stránky responsivní?
© všechna práva vyhrazena