Valve V6 is designed for pneumatic drill and mounting on the distributor with inner diameter of bore hose 45mm. Connection is done by three-wire cable with a standard lengths 2m. This valve does close the seeding procedure and the seed hose is closed. This type of tramline valve is suitable for sowing machine, where distributor is placed outside.
Valve designation | V6- Hose diameter 45mm |
The control mechanism | Micro gear motor |
Power voltage | Un=12Vss +/- 20% |
Rated current | In=20mA |
Short circuit current | Ik=2A |
Overload protection | Overload resettable fuse |
Time of moving sliding element | 1 second |
Signal open / shut off | Red/Green LED diode on the valve body |
supply cable | H03VV-F 3x0.5mm, flexible length, 2m standard |
End of the cable | sleeve connector AMP 3pin can be optionally fitted |
protection level IP | IP 64 |
Material | UV stable hardened ABS |
Product life | >100.000 cycles |
function | wire colour | valve open | interposition | shut off |
---|---|---|---|---|
IN1 | brown | 0V | - | +12V |
IN2 | blue | +12V | - | 0V |
OUT1 | yellow/green | Signal +12V | 0V | Signal +12V |
valve open
valve close
Green – open (seeds are flowing into the seed hoses)
Red – shut off (seeds are blocked, tramline valve is in operation)
No light – valve is blocked or other problem
IČ 29296145, DIČ CZ29296145
tvorba www, firemní a svatební videa
SKILL production
Jsou tyto stránky responsivní?
© všechna práva vyhrazena