Valve V7 is designed for pneumatic drill and mounting on the distributor with inner diameter of bore hose 45mm. Connection is done by three-wire cable with a standard lengths 2m. This type of tramline valve returns seed into the space under the distributor.
Valve designation | V7- Hose diameter 45mm |
The control mechanism | Micro gear motor |
Power voltage | Un=12Vss +/- 20% |
Rated current | In=20mA |
Short circuit current | Ik=2A |
Overload protection | Overload resettable fuse |
Time of moving sliding element | 1 second |
Signal open / shut off | Red/Green LED diode on the valve body |
supply cable | H03VV-F 3x0.5mm, flexible length, 2m standard |
End of the cable | sleeve connector AMP 3pin can be optionally fitted |
protection level IP | IP 64 |
Material | UV stable hardened ABS |
Product life | >100.000 cycles |
function | wire colour | valve open | interposition | shut off |
---|---|---|---|---|
IN1 | brown | 0V | - | +12V |
IN2 | blue | +12V | - | 0V |
OUT1 | yellow/green | Signal +12V | 0V | Signal +12V |
valve open
valve close
Green – open (seeds are flowing into the seed hoses)
Red – shut off (seeds are blocked, valves make tramlines)
No light – valve is blocked or other problem
IČ 29296145, DIČ CZ29296145
tvorba www, firemní a svatební videa
SKILL production
Jsou tyto stránky responsivní?
© všechna práva vyhrazena